Dipper See Examiner A Comprehensive Guide To Well Inspection With Heron S Downhole Camera

Learn how to use the Heron SERIES 2000, dipper-See EXAMINER - a versatile downhole inspection camera for well inspections, maintenance, and installation. Discover its features, setup, recording, and maintenance tips.

• The Heron SERIES 2000, dipper-See EXAMINER is a versatile downhole inspection camera for well inspections and maintenance.
• The camera comes in a rugged, portable case with essential accessories.
• Features of the dipper-See EXAMINER, including a durable frame and accurate depth measurement tape.
• How to use the camera, from setup to recording and maintenance.
• Tips for getting clear, high-quality video during inspections.

In this comprehensive guide, we will explore the functionality and usage of the Heron SERIES 2000, dipper-See EXAMINER, a robust and portable downhole inspection camera designed for well inspections, maintenance, and installation. This versatile tool comes with essential features and accessories that make it a valuable asset for well inspectors, well drillers, and hydrogeologists.

Features and Accessories

The dipper-See EXAMINER arrives in a rugged, military-grade, wheeled carry case for convenient field use. Inside this case, you'll find all the necessary accessories, neatly organized in compartments

• Manual
• Cleaning Kit
• DVR with SD Card
• Microphone
• 2 x Rechargeable batteries
• Battery Charger (with alternative plugs for international use)
• Retrieval hook
• Centralizer
• Sun Visor

The camera's frame is constructed from powder-coated steel with a vinyl holding grip, providing strength and durability while remaining easy to handle. Aluminum plates with stainless ball bearings ensure smooth tape movement. The 4-conductor polyethylene tape, available in metric or imperial markings, contributes to precise depth measurements. A shear pin style linkage above the camera probe helps protect the more expensive tape and probe, as it breaks away if the probe becomes stuck.

The built-in hanger and tape guide offer a convenient solution for securing the camera on the well casing's side and protecting the tape from sharp edges. The brake knob at the back of the frame allows you to stop the tape's descent at any time. The monitor features an adjustable positioning arm for flexible viewing angles and lighting conditions. The Power and DVR Mode buttons are conveniently located on the front.

Camera Operation

To use the dipper-See EXAMINER effectively, follow these steps

1. Power On Press the Power button to activate the camera, providing real-time viewing.

2. DVR Recording For recording, use the Mode button to activate the DVR function, which allows both real-time viewing and recording.

3. HD Display The video is displayed on a 7" screen for clear viewing in the field.

4. Audio Notes Connect the provided microphone for audio notes, enhancing the quality of your recordings.

5. Submersible Camera Probe The removable camera probe is fully submersible, ideal for inspecting holes 1" and wider. It boasts 7 ultra-bright LED lights and a 120-degree viewing angle.

Pre-Field Checklist

Before heading out to the field, make sure to perform a few checks

1. Battery Status Ensure both rechargeable batteries are fully charged for 8-10 hours of viewing time.

2. Camera Probe Inspect the lens for cleanliness, ensure tight connections, and check for cracks or water ingress.

3. Test Run Turn on the dipper-See and confirm that the image displays correctly on the monitor.

4. DVR Space If using the DVR recorder, check the SD card for sufficient space to save new recordings.

5. Familiarize with Accessories Understand the use of all the included accessories.

Field Usage

Once you're in the field and ready to conduct an inspection

1. Camera Setup Hang the camera on the well casing and run the tape over the tape guide.

2. Monitor Activation Turn on the monitor using the Power button.

3. Flexible Viewing Adjust the positioning arm to view the display screen at different angles or lighting conditions. Use the provided sun visor on sunny days.

4. DVR Recording If using the DVR, press the MODE button to begin recording.

5. Inspection Process Lower the camera probe into the well, ensuring smooth and steady movements to capture clear video in both directions. When the camera probe reaches the water, shake it to remove any bubbles from the lens.

6. Depth Measurement Record depth measurements using the tape markings.

7. Noting Findings Use the microphone to provide audio notes or manually record pertinent information along with depth.

8. Cleanup After inspections, use a clean, dry cloth to remove water and debris from the tape and camera probe for future deployments.

Video Playback and Sharing

To review your recorded inspections, follow these steps

1. SD Card Retrieval Remove the SD card from the DVR.

2. Playback Device Insert the SD card into a compatible device such as a tablet, laptop, or desktop.

3. Saving and Sharing After watching and saving your video, you can easily share it with clients or colleagues by email.

In conclusion, the Heron SERIES 2000, dipper-See EXAMINER is an invaluable tool for those involved in well inspections, maintenance, and installation. Its robust construction, versatile features, and user-friendly operation make it an essential companion in the field. For any inquiries or further assistance, you can contact Heron Instruments through their website at HeronInstruments.com. Thank you for watching and making the most of your downhole inspections with the dipper-See EXAMINER.

All rights reserved. Unauthorized reproduction, in whole or in part is strictly prohibited.